Digital Satellite Receiver with Dual Tuners and PVR User Manual

1.5.4 Connect the receiver to a TV set

• Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V,

TV out (UHF) or S/Video jacks.

1.5.5 Connect the receiver to a VCR

• Connect the SCART jack from the VCR to the back of the receiver.

• Satellite Receiver

• Video

• TV

1.5 Connecting and Installation

1.5.2 To Connect Satellite Antenna (DiSEqC 1.0)

• Connect the coaxial cable from the LNB to the LNB IN jack on back of the receiver.

1.5.1 How to connect the receiver to various other systems

There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local

supplier for assistance in setting-up your system that is best suited to your requirements.

1.5.3 To Connect Motorized System (DiSEqC 1.2)

• Connect one end of your coaxial cable to the LNB IN

connector on the receiver and the other end to the

REC or Receiver connector on the DiSEqC 1.2 motor.

• Connect the coaxial cable from the LNB to the LNB

connector on the DiSEqC 1.2 motor.

• Connect the delivered LOOP cable of about

15 cm according to the picture.

• Connect the delivered LOOP cable

of about 15 cm according to the

picture.

• Satellite Receiver

• Satellite Receiver• Satellite Receiver