OPERATING & INSTALLATION INSTRUCTIONS Dishwasher CDW 087
Contents For the user For the installer Important safety information 3 4 Installation instructions Water supply connections Water outlet hose connection Electrical connection 20 20 21 22 Description of the appliance 4 The control panel Before use Setting the water softener Rinse aid 5 5 7 Adjusting the worktop Fitting under a counter Levelling 23 23 23 Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent 8 8 9 10 Hints and tips 11 Washing pro
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety.
Description of the appliance 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Large filter 5. Salt container 6. Rinse aid dispenser 7. Detergent dispenser 8. Control panel 9. Central filters 13 1 12 2 3 11 4 10 5 9 10. Lower spray arm 6 11. Upper spray arm 12. Upper basket 7 13. Worktop 8 IN88 The control panel 1 2 3 4 5 6 7 1. Mains on indicator light 7. Wash programme phase indicator 2.
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. Pour half a litre of water inside the salt container and then fill with salt. 5. Fill the rinse aid dispenser.
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with rinse aid 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. A 3.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. UI57 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket. Arrange items on and underneath the fold-down cup rack so that water can reach all surfaces. Glasses with long stems can be placed upside down in the raised cup racks. Light items (plastic bowls etc.
Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser. Finish Powder recommended for every day use. Finish Liquid Gel ideal for every day use. As the gel is extra gentle it is recommended for fine both china.
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. Do not prewash dishes under running water.
Washing programmes Programme Degree of soil RINSE AND HOLD Any. Partial load (to be completed later in the day). POWER WASH 65°C Heavy soil. Crockery, cutlery, pots and pans Starting position of the programmer Required push buttons 1 On/Off 1 cold rinse, (to avoid food scraps from sticking together).
Operating sequence 1. Check the filters 9. Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. At the end of the washing programme At the end of the programme the dishwasher will automatically stop. The "Mains On" indicator light remains on until the On/Off push button is depressed. Check that there is rinse aid and salt 10. Switch off the dishwasher 3. Load the dishes Switch off the dishwasher by pressing the On/Off push button and open the door.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Fill the rinse aid dispenser. 3. Leave the door ajar to prevent the formation of any unpleasant smells. 4.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made even if the appliance is in guarantee.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No. ........ Ser. No. ......... In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Tricity Bendix Service Centre by telephoning: Mod. ........
Guarantee conditions Standard guarantee conditions We, Tricity Bendix Limited, undertake that if within 12 months of the date of purchase this Tricity Bendix appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher must be plumbed into a cold water supply.
Water outlet hose connection 2 3 Ø Ø 1. To the sink outlet siphon, securing it if necessary with a clip. 18 21 1 min 4 cm The end of the drain hose can be connected in the following ways: 3. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. min 30 cm max 100 cm max 100 cm 2. Hooked over the edge of the sink using the special curved plastic guide provided.
Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Adjusting the worktop You can move the worktop forward or backward by 25 mm in order to align the machine with other kitchen units. Simply unscrew the two front retaining screws, move the top to the required position and then retighten the screws. IN02 Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.
Tricity Bendix Service Force To contact your local Tricity Bendix Service Centre telephone CHANNEL ISLANDS GUERNSEY JERSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY SCOTLAND ABERDEEN (M05) 54 Claremont Street Aberdeen AB10 6RA AUCHTERMUCHY (M03) 33A Burnside Auchtermuchy Fife KY14 7AJ BLANTYRE (M07) Unit 5 Block 2 Auchenraith Ind Estate Rosendale Way Blantyre G72 0NJ DUMFRIES (M01) 93 Irish
Tricity Bendix Service Force To contact your local Tricity Bendix Service Centre telephone MIDLANDS BIRMINGHAM (M18) 66 Birch Road East, Wyrley Road Industrial Estate Witton Birmingham B6 7DB BOURNE (M44) Manning Road Ind Estate Pinfold Road Bourne PE10 9HT BRIDGNORTH (M72) 1 Underhill Street Bridgnorth Salop WV16 4BB GLOUCESTER (M23) 101 Rycroft Street Gloucester GL1 4NB HEREFORD (M31) Unit 3 Bank Buildings Cattle market Hareford HE4 9HX 08705 929 929 LONDON & EAST ANGLIA BECKENHAM (M79) 11 a G
Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ Customer care telephone number...
