CONTENTS Please reform 0 the sections in this booklet that apply 1o your particular model: Page Drawings Contents Warnings Geneva Information . Electrical Connection .. Unpacking Installation Positioning Installation Fitting... Re circulation Ducting Fitting Operating instructions Maintenance and Cleaning Beau's and Don'ts.. Help Us To Help You Customer Care Department Before Calling & Service Engineer Trinity Bendix Service Centers TECHNICAL SPECIFICATIONS DIMENSIONS Width om 52 Height om 15 Depth om 28.
WARNINGS WARNINGS Cont'd It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred o another owner, or should you move house and leave the appliance always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
GENERAL INFORMATION ELECTRICAL CONNECTION This Instruction book applies to the following models; “Trinity Bendix CH350B Brown 52cm Trinity Bendix CHS50W White 52cm This cooker hood is guaranteed and will give fasting service. The guarantee is only applicable if the hood has been installed in accordance with the installation instructions detailed in this bookie. This cooker hood has been designed for use fixed beneath a wall cabinet or purpose built canopy as illustrated in fig.
INSTALLATION INSTALLATION Cont'd Unpacking Care should be taken when unpacking the cooker hood to ensure the fixing kit, ducting spigot and literature: pack are retained with the hood. The fixing kit comprises 13mm fixing screws Positioning When installed above an electric cooking appliance the minimum distance between the surface of the hob elements and the lower grille of the cooker hood must be 65cm (25 1/27).
OPERATING INSTRUCTIONS MAINTENANCE The cover hood functions are controlled by three slide switches located centrally on the underside of the hood in the front edge of the metal inlet grille panel as illustrated in fig. 5. Ensure the hood is switched on at the supply connection unit. Worktop Lighting The switch (1) marked with the lamp symbol and numbered 0-1 as illustrated in fig. 5 controls the worktop lighting. Position -1 indicates the light Is operating.
MAINTENANCE Cont'd HELP US TO HELP YOU grease. When the skates become saturated the colored dots will stat to run and spread and this indicates the grease filter should be replaced. To remove the grease filter open the metal inlet grille. Carefully ease out the metal regaining wire clips to remove the grease fighter. Please ensure that the wire clips are handled with care and keep away from children as the wire clips have sharp points.
HELP US TO HELP YOU Cont'd BEFORE CALLING A SERVICE ENGINEER We strongly recommend that vou carry out the following checks on your appliance before calling a Service Engineer. it may be that the probable is & simple one, which you can solve yourself without the expense of a Service call.
Rating Plate The rating plate is situated inside the casing on the back panel. it gives the MODEL AND SERIAL NUMBER, which should be quoted in any communication or if the service department is contacted. It is advisable to make a note of these below and keep for reference before the appliance is installed MAKE AND MODEL NO, SERIAL NO.