User manual

Freezer

The freezer compartment will become progressively

covered with frost. This should be removed with the

special plastic scraper provided, whenever the

thickness of the frost reaches

.

During this operation it is not necessary to switch of

the power supply or to remove the foodstuffs.

However, when the ice becomes very thick on the

inner liner, complete defrosting should be carried out

and it is advisable to perform this operation when the

appliance is empty.

For complete defrosting (once or twice a year)

proceed as follows:

1 Turn the thermostat dial to the "OFF" position (O) or

disconnect the appliance from the mains.

2 Remove any food from inside the freezer and

fridge; wrap it in several sheets of newspaper and

store in a cool, dry place.

3 When defrosting is complete, dry the interior

thorough.

4 Reconnect the appliance to the mains or reset the

thermostat to 5 (coldest) and leave to run for at

least four hours.

5 Replace the previously removed food.

6 Return the thermostat to the normal position.

Important

A temperature rise of the frozen food packs during

defrosting may shorten their safe storage life.

Never use sharp metal tools to scrape off frost from

the evaporator as this could damage the appliance

beyond repair.

Changing the Light Bulb

Should the light fail to work you can change it as

below:

Disconnect the appliance from the electricity supply.

Remove the lamp cover retaining screws, then take

the lamp cover off in the direction of arrow and the

bulb can be changed. (Type of the bulb: 230 V, 15 W,

E 14 thread)

After changing bulb replace the lamp cover and

retaining screws and reconnect the appliance to the

electricity supply.