Installation Guide

13
RH
Installation With a C-Wire
If your system has a C-Wire, it will power
your new
TrickleStar Thermostat.
Y
ou do not need a C-Wire Kit (sold
separately as an accessory).
Step 1: Disconnect and label old
thermostat wires
Disconnect and label the wire from your
old thermostat carefully
, one wire at a
time, using the wire labels provided.
Make sure the wires do not fall back into
the wall when released from the terminals
and that the labels are fastened to the
wires securely
.
Note: Make sure that the C-Wire at your old thermostat is directly
connected to the HVAC Control Board.