Installation Guide
21
Note:
• You can refer to “Wiring Diagrams” from pages 58 to 63 for some
common HVAC equipments.
• Connect the remaining wires to their corresponding terminals. Pull the
wires gently to ensure that they are connected securely.
• Ta
pe the ends of any excess wires and push the wires back into the wall
carefully.
• Make sure there is no draft coming from the hole in the wall as it may
affect the temperature readings.
Do not connect the R or RC wire to the RH terminal
or the R
H wire to the RC terminal.
X
Rc
R
H
G
Y1
Y2
W1
W2
O/B
GK/
C
ACC-
ACC+
YK