Installation Guide

42
Step 15: Connect the wires
•
Connect the RC, GK, YK and W/W1/E wires to their corresponding
terminals on the Thermostat Mounting Plate as shown below.
•
Connect the remaining wires to their corresponding terminals on the
T
hermostat Mounting Plate.
RG WY
Rc
R
H
G
Y1
Y2
W1
W2
O/B
GK/
C
YK
ACC-
ACC+
Note:
• You can refer to “Wiring Diagrams” from pages 58 to 63 for some
common HVAC equipments.
• Connect the remaining wires to their corresponding terminals. Pull the wires
gently to ensure that they are connected securely.
• Tape the ends of any excess wires and push the wires back into the wall
carefully.
• Make sure there is no draft coming from the hole in the wall as it may affect
the temperature readings.