Measurement Guide

www.trim-a-slab.com
1. Measure one of the cutouts to verify
that the template is being printed at
full scale
2. Cut out along lines
3. The wider end should not fit between
the slabs
4. The narrow end should fit between
the slabs
This gap
should
use the
¾” size
Trim-A-Slab Sizing Guide
¾”
1”
8
1-
3
/ ”
½”
25 &
50 ft
25 &
50 ft
25 ft
rolls
25 ft
rolls
⅜”
25 &
50 ft
50 ft
3
16
”
25 &
1
1
1
Standard Edge
Tapered Edge