Owner Manual

10
Installation
Attaching the Door
Follow these steps to attach the door:
1. Lift the door and place the track into the grooves on the hangar wheels
2. Move door from end to end to see how the door slides
Door Guide Installation:
Follow these steps to install the T-Guide:
1.. Plumb and block the door so it is square to the floor
2.
.. Determine how wide the door overlap is (min. 1")
Notes: The door overlap is the distance between the leading edge of the door when fully open, and the
trailing edge of the door when fully closed.
3. Mark the centerline of the overlap
4. Place the guide and slide it to t
he centerline of the overlap and mark the edges off the base.
5. Remove the door off of the track
6. Realign the guide to the base marketing. Pre-drill and install the guide.
7. Put the door back on the track and slide it to test. If necessary, adjust the guide so it is square to the
door.
Installed T-Guide T-Guide
1” overlap
Center of T-Guide