Instructions / Assembly

ASSEMBLY INSTRUCTIONS
Insert (2) DOWELS (HH) into each side of
BOTTOM SHELF (B) as shown.
Connect LEFT SIDE FRAME (C) with BACK
FRAME (F) and BOTTOM SHELF (B). Make
sure all CONNECTOR SCREWS (FF) & DOWELS
(HH) are inside corresponding holes.
Insert (2) CAM LOCKS (GG) into BACK FRAME
(F) and (3) CAM LOCKS (GG) into BOTTOM
SHELF (B) with arrow on CAM LOCK (GG)
pointing toward LEFT SIDE FRAME (C).
Use SCREWDRIVER (MM) to turn CAM
LOCKS (GG) clockwise until LEFT SIDE
FRAME (C) is pulled tight with BACK
FRAME (F) and BOTTOM SHELF (B).
Repeat to connect RIGHT SIDE FRAME
(D).
STEP 6
STEP 7
© 2020 TRINITY - 800.985.5506
6
GG (10) HH (4) MM (1)
D
C
F
FF
E
B
MM
HH
GG
KK (2) LL (2)JJ (4) NN (1)
Place (1) WASHER (JJ) over stem of each
NON-LOCKING CASTERS (KK) and screw each
into LEFT SIDE FRAME (C). Repeat with
LOCKING CASTERS (LL) on RIGHT SIDE
FRAME (D). Fully tighten casters with
provided WRENCH (NN).
CASTERS can also be installed as desired,
but you need to ensure (2) LOCKING
CASTERS (LL) are on same side of Kitchen
Island.
Use provided caster wrench to tighten
completely. Failure to do as instructed
could result in caster stem breaking.
D
C
B
JJ
LL
KK
NN
E
GG