User Guide

15
Standard Extender/Splitter Installation
10
Repeat step 9 for each additional monitor being connected.
11
Turn on the power to the HDMI source. The orange RJ45 LEDs illuminate
on the B126-002 and B126-004 to indicate the unit is receiving a
signal from the source. The screen should now be displayed on the
connected monitors.
12
If necessary, use the Equalization control on the B126-1A0 or
B126-1A0-WP-1 to adjust the video image.
Note: An improper Equalization setting can cause the monitor not to display a picture
at all. Try each Equalization setting until an acceptable picture is displayed.
17-07-080-933023-EN.indd 15 7/13/2017 10:54:12 AM