User Guide

19
Extender/Splitter Daisy-Chain Installation (B126-004 only)
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series cables are made with 24 AWG solid wire cabling.
3) The B126-004 is set to transmit a stereo audio signal by default. Press the Audio
button on the B126-004 to switch to 7.1-channel surround-sound audio.
4) Using the B126-1A0 and B126-1A0-WP-1, a 1080i (60 Hz) signal can be extended
up to 200 ft. from the source, or a 1080p (60 Hz) signal up to 150 ft. from the
source. Using a B126-1P0, B126-1P0-MINI or B126-1P0-WP-1, a 1080i (60Hz)
signal can be extended up to 100 ft. from the source, or a 1080p (60Hz) signal up
to 50 ft.
17-07-080-933023-EN.indd 19 7/13/2017 10:54:13 AM