User Manual

Installation continued

Non-Kit Daisy Chain Installation

(B132-004-2 and B132-004A-2 only)

Note:

1. For models that support EDID copy, perform the EDID copy procedure described

in this manual prior to installation.

2. The diagram above shows a B132-004A-2 VGA + Audio Extender/Splitter Kit

daisy chain installation. Installation will be the same for non-audio models,

except that an audio source and speakers will not be connected.

3. Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

4. To achieve maximum distance and performance, 24 AWG solid-wire Cat5e/6

cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a

gauge (Awg) size higher than 24 AWG, will result in shorter extension distance.

All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling.

Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire

bulk cables. For optimal image quality between 500 and 1,000 ft., use Zero-

Skew cable, such as Tripp Lite P524-01K.

5. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-

Series VGA video or P504-Series VGA video and audio cables with RGB coax.

Source PC

Local PC and

Speakers (Optional)

B132-100A-WP-1

B132-004A-2

B132-100A

14-11-071-9333F9.indd 19 11/20/2014 4:42:45 PM