Owners manual

8
9. Specifications
8. Adjusting Storage Shelf Dividers
Your tablet charging station comes with one (CS16USB), two (CS32USB) or three (CS48USB)
storage shelves with adjustable dividers that each can accommodate up to 16 personal electronic
devices per shelf.
8.1 Adjusting the CS16USB Shelf Dividers
Remove any personal electronic devices stored on the shelf tray. Then remove the shelf tray from
the cabinet by unscrewing the four fasteners attached to the two front rack rails. Once the shelf is
removed, rearrange the dividers by pulling them out or snapping them into the shelf tray.
8.2 Adjusting the CS32USB and CS48USB Shelf Dividers
Remove any personal electronic devices stored on the shelf tray. Then unlock and open the rear
door to the cabinet. From the front or rear of the cabinet, rearrange the dividers by pulling them out
or snapping them into the shelf tray. Repeat as necessary for additional shelf trays.
Model CS16USB CS32USB CS48USB
Dimensions (H x W x D) 14.5 x 23.63 x 17.5”
(368 x 600 x 445 mm)
21.6 x 23.63 x 21.6”
(549 x 600 x 549 mm)
35.6 x 23.6 x 21.6”
(905 x 600 x 549 mm)
Unit Weight
29 lb (13 kg) 55 lb (25 kg)
96 lb (43.5 kg)
Load Capacity* 200 lb (90 kg)
Stationary or Rolling
200 lb (90 kg)
Stationary or Rolling
250 lb (113 kg)
Stationary or Rolling
Cabinet Mounting Depth
(Adjustable)
3” to 16.5” (76 to 419 mm) 3” to 20.5” (76 to 521 mm) 3" to 20.5" (76 to 521 mm)
Charger/Hub Ports 16 x USB 2.0 A (Female)
1 x USB 2.0 B (Female)
1 x USB 2.0 mini (Female)
32 x USB 2.0 A (Female)
2 x USB 2.0 B (Female)
2 x USB 2.0 mini (Female)
48 x USB 2.0 A (Female)
3 x USB 2.0 B (Female)
3 x USB 2.0 mini (Female)
Transmission Speed Up to 480 Mbps Up to 480 Mbps Up to 480 Mbps
Power Requirement Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
Input: 100-240V, 2.5A, 50/60 Hz
Output: 5.0V, 2.4A Max (per USB
port)
Operating Temperature 32° to 104° F
0° to 40° C
32° to 104° F
0° to 40° C
32° to 104° F
0° to 40° C
Operating Humidity 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing 5 to 95% RH, Non-Condensing
Number of Charger/Hub Units 1 2 3
Charger/Hub Dimensions per Unit
(H x W x D)
1.75 x 17.5 x 9.5”
(45 x 445 x 240 mm)
1.75 x 17.5 x 9.5”
(45 x 445 x 240 mm)
1.75 x 17.5 x 9.5”
(45 x 445 x 240 mm)
Enclosure Material Metal Metal Metal
Regulatory Approvals UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS
UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS
UL 60950, TUV (US and Canada),
NOM (Mexico) and RoHS
*Full wall-mount load capacity requires a mounting surface capable of bearing the full load of the tablet charge and sync station and all connected components. Rolling applications
require optional SRCASTER accessory kit. Specifications are subject to change without notice.
10. Optional Casters
An optional caster accessory kit (Model: SRCASTER) is available for purchase through Tripp Lite
(visit www.tripplite.com for details). The SRCASTER Kit’s 4 casters and mounting hardware install to
the pre-drilled holes located on the base of the enclosure. For further installation instructions, refer
to the manual included with the SRCASTER Kit.