Operation Manual

3
EN
WARNING
• Do not use means to accelerate the defrosting
process or to clean, other than those recommended
by the manufacturer.
• The appliance shall be stored in a room without
continuously operating ignition sources (for
example: open ames , an operating gas appliance
or an operating electric heater).
• Do not pierce or burn.
• Be aware that refrigerants may not contain an odor.
• Appliance shall be installed, operated and stored
in a room with a oor area larger than X m2. (X=4
for 5000Btu/h, 7000Btu/h, 8000Btu/h; X=7.7 for
9000Btu/h, 10000Btu/h, 10500Btu/h)
• Contact authorized service technician for repair or
maintenance of this unit.
• Do not pull , deform. or modify the power supply
cord , or immerse it in water . Pulling or misuse of
the power supply cord can result in damage to the
unit and cause electrical shock.
• Compliance with national gas regulations shall be
observed.
• Keep ventilation openings clear of obstruction.
• Any person who is involved with working on or
breaking into a refrigerant circuit should hold
a current valid certicate from an industry-
accredited assessment authority, which authorizes
their competence to handle refrigerants safely
in accordance with an industry recognized
assessment specication.
• Servicing shall only be performed as recommended
by the equipment manufacturer. Maintenance
and repair requiring the assistance of other
skilled personnel shall be carried out under the
supervision of the person competent in the use of
ammable refrigerants.
• Do not operate or stop the unit by inserting or
pulling out the power plug, it may cause electric
shock or re due to heat generation .
• Unplug the unit if strange sounds, smell, or smoke
comes from it.
Air conditioner