Operation Manual

6
FUNCTION OF CONTROL PANEL
1. Power button
2. Temperature buttons
3. Mode button
4. Fan speed adjustment button
5. Timer on/o button
1 2
2 3
4 5
BEFORE THE FIRST USE
Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose, and adjust the window position well.
• Insert the power cord into an grounded AC220~240V/50Hz socket;
• Press the POWER button to turn on the air-conditioner.
• Operation temperature range: 18°C - 35°C
• Check whether the exhaust hose has been mounted properly.
• When using functions on cooling and dehumidifying, keep an interval
of at least 3 minutes between each POWER.
USE
Cooling operation
• Press the “Mode” button till the “Cool” icon appears.
• Press the p or q button to select a desired room temperature. (16ºC-
31ºC)
• Press the “Fan Speed” button to select wind speed.
Dehumidifying operation
• Press the “Mode” button till the “Dehumidify Indicator Lamp” blinks
• Automatically set the selected temperature to current room
temperature minus 2ºC. (16ºC-31ºC)
• Automatically set the fan motor to LOW wind speed.
Fan operation
• Press the “Mode” button till the “Fan” icon appears.
• Press the “Fan Speed” button to select wind speed.
Timer operation
Timer ON setting
• When the air-conditioner is OFF, press the “Timer” button and select a
desired ON time through the temperature and time setting buttons.
• “Preset ON Time” is displayed on the operation panel.
• ON time can be regulated at any time in 0-24 hours
Timer OFF setting
• When the air-conditioner ON, press “Timer” button and select a desired
OFF time through the temperature and time setting buttons.
• “Preset OFF Time” is displayed on the operation panel.
• OFF time can be regulated at any time in 0-24 hours.
Instruction manual