Operation Manual

Before plugging in
 Make sure your electricity supply is the same as the one shown on the underside of
the power unit.
Before using for the first time
 Remove all packaging including the plastic blade covers from the knife blade. These
covers should be discarded as they are to protect the blade during manufacture and
transport only.
 
To use the food chopper
o Place the non slip mat onto the work-surface, rib upside down.
o Position the bowl onto the middle of the non slip mat.
o Fit the knife blade over the pin in the bowl.
o Add your food, see processing guide.
 Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
 s coffee beans, ice cubes, spices or
chocolate-
o Fit the splashguard. Make sure the slots in the splashguard fit over the
handles in the rim of the bowl.
 The super chopper will not operate unless the splashguard in fitted in the right
position.
o Fit the power unit.
o The power unit will only fit correctly in two positions.
o Plug in. press down on the power unit for short lengths of time to produce a
pulsing action-this will avoid over processing the ingredients.
o If the appliance is overloaded, remove some of the mixture and continue
processing in several batches.
o Stop the appliance and scrape down if necessary.
o Do not run the chopper continuously for longer than 10 seconds. Leave to
cool for 1 minute in between each 10 seconds operation.
o After use. Unplug and dismantle.
Cleaning
 Always switch off and unplug before cleaning.
 Handle the cutting blade with care as they are extremely sharp.
 Some food will discolorflavor of your food.