Operation Manual

8
CHARGING
Charging iPod battery using the dock.
• In any mode, directly dock your iPod portable player on the cradle for charging.
* Charging IPOD / IPHONE only can work when AC power supply. When the host
use battery power, do not charging for IPOD / IPHONE.
OTHER FEATURES
EQ
Press the "EQ" button on remote control, each press switch the EQ function as
follows:
1. CLASSIC
2. ROCK
3. POP
4. JAZZ
5. FLAT (NORMAL)
Notes:
• The player not responsible for playability of MP3 in any case. Due to recording
condition such as PC performance, writing software, media ability or etc.
• For CD-RW, CD-R, it may not be played according to the type of this disc.
ID3 TAG (FOR MP3 ONLY)
1. Press once "INFO" button, LCD display shows "ID3 ON" and ID3 text will show on display.
2. Press again, the LCD display shows "ID3 OFF" and terminate ID3 mode.
Notes:
Due to various solutions, ID3 text function may not be played.
INTRO
1. Press the "INTRO" button during play disc to play each song for 10 seconds.
2. Press the "INTRO" button again to resume normal playback.
3. Not available on memory playback.
MUTE
1. Press the "MUTE" button to stop the sound during playing disc.
2. Press the "MUTE" button again to resume the sound.
OTHER FEATURES
RANDOM
1. Press the "RANDOM" button on remote control during playing disc, the appilance
will select and play a track randomly.
2. Press the "RANDOM" button again to terminate random mode.
3. The function is not available on program playback.
SLEEP
1. Press the "SLEEP" button on remote control, display will show "SLEEP 90". That
means, after 90 minutes, appliance will automatically turn to standby mode.
2. Press the "SLEEP" button again to select the automatically turn off time, from 90,
80, 70, 60, 50, 40, 30, 20, 10 minutes.
3. Press the "SLEEP" button to "SLEEP 00" to canel sleep function.
AUX IN
Select AUX mode to listen to external audio devices connected through the 3.5mm
Auxiliary Stereo Line-In jack. Press FUNCTION to select AUX mode.
1. Use a 3.5mm Male-to-Male Stereo cable to connect any external audio device with a
3.5mm Headphone or Line-Out jack to the AUX IN jack on the front panel of the appliance.
2. Start playabck on the external audio device. Adjust the volume on the audio
device (do not set the volume too high to avoid distortion). You may also adjust
the volume on the appliance.
3. To control playback function, use the controls provided by the external audio device.
Instruction Manual