Operation Manual

9
OTHER FEATURES
CLOCK SETTING
1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "CLOCK" button and hold for few seconds to entry clock set mode. The
display will show "24H" and flashing.
3. Adjust time format ( 12H / 24H ) by pressing the "SKIP +" or "SKIP -" button.
4. Press the "CLOCK" button to confirm time format, display will show "AM 12:00" or
"PM 12:00" if 12H format is set or "00:00" if 24H set.
5. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK" button
to confirm.
6. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK"
button to confirm.
Notes:
Because clock setting is at standby mode, the display is dim.
TIMER SETTING
Timer setting must be after completed clock setting.
1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "TIMER" button to entry timer set mode.
3. The display will show "TIMER ON", and AM 12:00 or PM 12:00 if 12H format is set
or 00:00 if 24H is set.
4. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button
to confirm.
5. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER"
button to confirm.
6. The display will show "TIMER OFF", and AM 12:00 or PM 12:00 if 12H format is set
or 00:00 if 24H is set.
7. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button
to confirm.
8. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER"
button to confirm.
9. The display show input source by pressing "SKIP +" or "SKIP -" (Chose CD, i-Pod or
Tuner). Chose the input and press "TIMER" button to confirm the selection.
10. The display show volume level pressing "SKIP +" or "SKIP -" to adjust the volume
level and press "TIMER" button to confirm the selection.
11. After confirmation the unit display show "TIMER ON TIME", "TIMER OFF TIME",
"INPUT SOURCE" and "VOLUME LEVEL" and unit go to standby mode.
12. Press the "TIMER" button to activate timer on / off function.
13. If you want to adjust the timer, press and hold "TIMER" button for 2 sec. It go to
timer setting mode. Follow steps from 4.
14. Press and hold the "PLAY / PAUSE" button over 5 sec. to cancel all timer setting.
Follow steps from 4.
OTHER FEATURES
SNOOZE
• SNOOZE must be after completed timer setting.
• When the timer is triggered. You may press the "SNOOZE" button on the remote
control to delay the alarm for another 9 minutes.
MENU / ENTER / MENU DN / MENU UP
MENU / ENTRE / MENU DN / MENU UP button is only for iPod / iPhone.
• When playing iPod / iPhone, press the "MENU" button to back to previous menu.
• Press the "ENTER" button to menu selection.
• Press the "MENU DN" or "MENU UP" to select next menu.
• Press the "ENTER" button again to select a desired menu or track.
• When All the desired tracks have been selected, pree the "ENTER" button to play.
EN
Instruction Manual