Operation Manual

• Using an extension cord or something similar is not allowed.

• Make sure that the cord is not hanging over the edge of the table

or counter, does not touch any hot surfaces or is coming directly

into contact with the hot parts of the appliances. Don not place the

appliance underneath or close to curtains, window coverings etc

• Make sure the cord does not touch the hot parts of the appliance.

• We advise to place a heat resistant coating between your table and the

appliance (this way you don't get burns on your table or table cloth).

• Do not use this appliances in the bathroom or near a sink lled with

water. If this appliances has fallen into the water do not under no

circumstances directly grab this appliances but rst pull the plug from

the socket.

* Competent qualied electrician: after sales department of the producer

or importer or any person who is qualied, approved and competent to

perform this kind of repairs in order to avoid all danger. In any case you

should return the appliance to this electrician.

PARTS DESCRIPTION

1. Hot plate

2. Thermostat

3. Pilot light

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers,

protective foil or plastic from the device.

• Clean the plate with a damp cloth.

• Connect the power cable to the socket. (Note: Make sure the voltage

which is indicated on the device matches the local voltage before

connecting the device. Voltage 220V-240V 50Hz)

• The heating plate is provided with a protective layer which for the

rst use should be removed. Switch the device and select the highest

setting for 10 minutes. There may be created some smoke by the

protection which now lit the heating plate. Then you can switch o the

cooker or use it.

Instruction manual