Operation Manual

5
EN
TO REDUCE THE RISK OF INJURY TO PERSONS
GROUNDING INSTALLATION
DANGER: Electric Shock Hazard
Touching some of the internal components can cause serious personal
injury or death. Do not disassemble this appliance.
WARNING
Electric Shock Hazard Improper use of the grounding can result in electric
shock. Do not plug into an outlet until appliance is properly installed and
grounded.
CLEANING
Be sure to unplug the appliance from the power supply.
• Clean the inside of the oven after using with a slightly damp cloth.
• Clean the accessories in the usual way in soapy water.
• The door frame and seal and neighbouring parts must be cleaned
carefully with a damp cloth when they are dirty.
TWOROUNDPIN PLUG
This appliance must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an escape
wire for the electric current. This appliance is equipped with a cord having
a grounding wire with a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded. Consult a qualied
electrician or serviceman if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly
grounded. If it is necessary to use an extension cord , use only a 3-wire
extension cord.
1. A short power-supply cord is provided to reduce the risks resulting
from becoming entangled in or tripping over a longer cord.
2. If a long cord set or extension cord is used:
• The marked electrical rating of the cord set or extension cord should
be at least as great as the electrical rating of the appliance.
• The extension cord must be a grounding-type 3-wire cord.
• The long cord should be arranged so that it will not drape over the
counter top or tabletop where it can be pulled on by children or
tripped over unintentionally.
UTENSILS
CAUTION: Personal Injury Hazard
• It is hazardous for anyone other than a compentent person to carry
out any service or repair operation that involves the removal of a cover
which gives protection against exposure to microwave energy.
• See the instructions on "Materials you can use in microwave oven or
to be avoided in microwave oven." There may be certain non-metallic
utensils that are not safe to use for microwaving. If in doubt, you can
test the utensil in question following the procedure below.
Utensil Test:
1. Fill a microwave-safe container with 1 cup of cold water (250ml) along
with the utensil in question.
2. Cook on maximum power for 1 minute.
3. Carefully feel the utensil. If the empty utensil is warm, do not use it for
microwave cooking.
4. Do not exceed 1 minute cooking time.
Microwave-grill