Instruction manual
H
6
REVERSING THE PLATE OVER TO USE REVERSE SIDE
1. Turn temperature control switch to the OFF setting.
2. Unplug appliance from wall outlet.
3. Allow unit to cool down completely (at least 30 minutes).
4. Carefully slide out the drip cup by pressing down on the tab,
(see gure H). Clean cup and replace in base.
5. Thoroughly clean the plate.
6. Flip the plate over and return to base.
7. Make sure that the drip hole in the plate lines up over the drip cup.
8. Reconnect the plug into a wall outlet.
USING THE SKEWERS
1. Assemble the unit with the plate, drawers and drip cup in their proper
positions. Note: the plate must be on the unit when using the skewers.
Please keep in mind that it is very hot when the unit is operating.
2. Turn the temperature control switch to the desired temperature and
preheat for approximately 10 to 12 minutes.
3. Prepare the food according to your favorite recipe and slide pieces onto
the skewers.
1. Pull the drawers open. Place the skewers into the skewer slots so the star-like
shape at the end of each handle is inserted into a gear slot in the front end of
the drawer. Close the drawer securely. Note: If you are using large cubes of
meat or seafood, you may only be able to cook six pieces at once.
2. Press the control switch to ON. The switch light will illuminate to let you
know the skewers are rotating.
3. To see if the food is ready, press the control switch to stop the skewers from
turning and remove the skewers with a pot holder. If more time is needed
replace the skewer and press the control switch to resume cooking.
USING THE HOT DOG ROLLERS
1. Assemble the unit with the plate, drawers and drip cup in proper
positions. Note: The plate must be on the unit when using the hot dog
rollers. Please keep in mind that it is very hot when the unit is operating.
2. Turn the temperature control switch to the desired temperature and
preheat for approximately 10 to 12 minutes.
3. Assemble the hot dog rollers by slipping the skewers through the
holes in each end of the hot dog roller caps.
4. Pull the drawers open. Place the skewers with hot dog rollers into
the skewer slots so the star-like shape at the end of each handle is
inserted into a gear slot in the front end of the drawers.
5. Use tongs to position the hot dogs in between two of the hot dog rollers.
Four hot dogs rollers will t over each of the drawers. Close the drawer
securely. It is possible to use dierent cooking features simultaneously.
USER MAINTENANCE
• Never use metal utensils, as they will scratch the non-stick plate.
Instead, use only wooden or heat-proof plastic utensils.
• Never let plastic utensils come in contact with the hot plate.
Instruction manual