Instruction manual

Parts list
1 Body
2 Short spray nozzle
3 Safety cap
4 Steam button
5 Handle
6 Power cord and plug
7 Power indicator
8 Funnel
9 Measuring cup
10 Spray nozzle with round brush
11 Bent spray nozzle
12 Long spray nozzle
13 Extended connecting spray nozzle
14 General spray nozzle
15 Spray nozzle for door/ window
16 Towel sleeve
Operation procedures
• Unpack the product, check the accessories and documents supplied with the product and make sure
that the product and accessories are not damaged.
• Before use, please read the instruction manual carefully. The steam cleaner is only for use in
households.
• First, place the steam cleaner on a flat platform, push down the safety cover (I), unscrew the safety
cap counter clockwise(II) , and then install the funnel.
(I) (II)
• Fill the measuring cup with maximum 175 ml. of clean water and add the water into the tank. Do not
overfill the tank, some space must be left in the tank. Re-install the safety cap and tighten it in
position.
• After plug-in it will take around 4 minutes that the steamcleaner is ready for use. At this time lightly
press the steam button and check whether steam is sprayed out of the nozzle. Before using please put
175 ml. of water in the tank and spray this, for example into the sink. (Do not aim the spray nozzle at
other persons).
• If there is steam sprayed out, please install suitable accessories according to your needs after you
release the button.
• Press down the steam button again in order to carry out the operations required by you.