Instruction manual

Functions
• Disinfection and sterilization:
Install the long spray nozzle (12) on the short spray nozzle (2) and aim the spray nozzle at the position
that needs disinfection, then press down the steam button. High-temperature steam can kill bacteria.
• Cleaning the clothes:
Install the general spray nozzle (14) on the short spray nozzle (2), and then mount the towel sleeve
(16). Aim it at the hung clothes, and press down the steam button and move the general spray nozzle
up and down as well as to the left and to the right at the same time. Then stains can be removed from
the clothes.
• Cleaning doors and windows:
Install the general spray nozzle (14) on the short spray nozzle (2), and then install the spray nozzle for
door/window (15) on it. Aim this at the door/window, and press down the steam button and move it
up and down as well as to the left and to the right at the same time. Then stains can be removed from
the door/window.
• Cleaning the floor boards:
Install the bent spray nozzle (11) or round spray nozzle (10) on the long spray nozzle (12). For spots on
difficult places you can also use the extended connecting spray nozzle (13) . Then aim it at the floor
board, and press down the steam button to remove the dirt and stains in wall corners and on the
floor.
Refill water during operation
• Unplug the power cord and disconnect the power supply.
• Press down the steam button to release the pressure until no steam is injected out.
• Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until
no steam comes out. Then make sure the machine cools down for about five minutes. Finally,
completely remove the safety cap.
• Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the tank.
• Re-install the safety cap onto the machine body and tighten it in position.
Cleaning
• When finished cleaning, unplug the power cord and disconnect the power supply.
• Press down the steam button to release the pressure until no steam is injected out.
• Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until
no steam comes out. Then make sure the machine cools down for about five minutes. Finally,
completely remove the safety cap.
• Empty the residual water in the tank and clean the external surface with a piece of dry cloth.
• At last, re-install the safety cap onto the machine body and tighten it in position.
Guidelines for protection of the environment
This appliance should not be put into the domestic garbage at the end of its useful life, but must be disposed of at a central point for
recycling of electric and electronic domestic appliances. This symbol on appliance, instruction manual and packaging puts your attention
to this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances you contribute an
important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.