Installation Guide

Attach blades to fan assembly by using flat washers & screws provided from hardware bag.
(* Repeat until all 6 blades are installed firmly.)
Flat Washer(3)
Blade Screw(3)
Extruded Alum. Blade(6)
4. BLADE INSTALLATION
Attach blades to fan assembly by using flat washers & screws provided from hardware bag.
(* Repeat until all 6 blades are installed firmly.)
Flat Washer(3)
Blade Screw(3)
Resin Blade(6)
4A. For 66" Resin Blades
4B. For 72" / 84" Extruded Alum. Blades
Fan Assembly
Fan Assembly
3. CANOPY INSTALLATION
1 Push up canopy until two screws pre-screwed on mounting bracket are engaged with two key holes
on canopy.
2 Rotate canopy slightly until two pre-installed screw heads are engaged in the narrow end of key holes.
3 Tighten both screws.
Note: Two screws are pre-installed on mounting bracket for canopy installation.
Key Hole (2)
Canopy
Screw (2)
1
2
3
P5