Operation Manual

EN Operating manual – Local air conditioner PAC 2000 X 2
Device description
The primary purpose of the device is room cooling. It further filters
and dehumidifies the air thus creating an agreeable room climate.
Additionally, the device can be used as heater.
In ventilation mode the device also provides the opportunity of air
circulation without cooling effect. In dehumidification mode
moisture is withdrawn from the air.
The device operates fully automatically and thanks to its
microprocessor control features a multitude of further options,
the device can, for instance, be switched on or off automatically
with time delay via the timer function.
Handling the device can be conveniently accomplished via the
control panel at the device or the supplied infrared remote
control.
The device was designed for universal, flexible and
uncomplicated application. Due to its compact dimensions it can
be easily transported and used in all interior spaces.
The air conditioner cools the room air by withdrawing warmth.
The absorbed warmth is emitted to the outside via the exhaust air
hose; cooled air is fed to the installation site by means of a fan.
Accumulating condensate drips from the evaporator onto the hot
condenser, there it evaporates and then is transported to the
outside via the exhaust air hose.
Excess condensate is dripping from the condenser into a
condensate trap and is there re-fed to the condenser by use of a
paddle wheel, where it evaporates and is discharged along with
the exhaust air flow.
A cooling agent sees to the transport of the absorbed warmth
within the closed refrigerant circuit.
Device depiction
Scope of delivery
1 x air conditioner PAC 2000 X
1 x exhaust air hose
1 x remote control
1 x 3 V lithium battery CR002
Information about the device
No. Operating element
(1) Control panel
(2) Remote control receiver
(3) Warm air outlet
(4) Evaporator filter
(5) Cooling air inlet
(6) Exhaust air hose connector
(7) Cooling air outlet
(8) Condenser filter
(9) Ambient air inlet
(10) Drain hole
Technical data
Parameter Value
Model PAC 2000 X
Dehumidification performance 30 l per day
Cooling capacity 2000 W
Electric connection 220 V AC, 50 Hz
Nominal cooling capacity 900 W
Refrigerant R410A
Dimensions (WxDxH) 288 mm x 428 mm x 625 mm
Minimum distance
to walls or other objects
A: Top: 50 cm
B: Rear: 50 cm
C: Side: 50 cm
D: Front: 50 cm