Operation Manual

EN Operating manual – Local air conditioner PAC 2000 X 6
Control panel
No. Designation Function
1 Power Press this button to turn the device on or off.
2 Functions Use this button to set cooling, heating or dehumidification operating mode.
3 Temperature control (+) Pressing this button during cooling operation increases the preset temperature by
1 °C each time it is actuated; the maximum limit is 30 °C.
Pressing this button during heating operation increases the preset temperature
by 1 °C each time it is actuated; the maximum limit is 25 °C.
4 Temperature control (-) Pressing this button during cooling operation reduces the preset temperature by
1 °C each time it is actuated; the minimum limit is 17 °C.
Pressing this button during heating operation reduces the preset temperature by
1 °C each time it is actuated; the minimum limit is 15 °C.
5 LED display The display indicates the current temperature or timer settings.
If the set temperature or timer value is to be adjusted, the new setting will be
indicated, then the display returns to the currently set temperature.
The display also serves to indicate error messages in case of a fault, see
ERROR CODES.
6 SPEED Press this button to adjust the fan speed.
During heating and dehumidification operation this button is disabled.
7 PROGRAMMABLE TIMER
8SLEEP
9 Alarm Once the maximum filling level of the water tank is reached, E4 or the ALARM
warning light appears on the display.
10 LED speed high high fan speed indicator
11 LED speed medium medium fan speed indicator
12 LED speed low low fan speed indicator
13 LED auto mode AUTO mode indicator
14 LED sleep mode SLEEP mode indicator
15 LED dehumidifying dehumidification operating mode indicator
16 LED heating heating operating mode indicator
17 LED cooling cooling operating mode indicator
(10)
(11)
(12)
(13)
(17)
(16)
(15)
(14)