Use and Care Manual

Not for

Reproduction

Specications

Model 020764

White, 40

2000 PSI (138 bar) @ 2.1 GPM (7.6 L/min)*

Yellow, 15

2500 PSI (172 bar) @ 1.9 GPM (7.2 L/min)*

Red, 0

2700 PSI (186 bar) @ 1.8 GPM (6.8 L/min)*

Water Supply Temperature 41°F (5°C) - 100°F (38°C)

min Water Supply Flow Rate 3.1 GPM (11.7 L/min)

min Water Supply Pressure 20 PSI (1.38 bar)

Engine Displacement 9.93 in

(163 cc)

Spark Plug Gap 0.030 in. (0.76 mm)

Oil Capacity 16 oz (0.5 L)

Model 020765

White, 40

2400 PSI (165 bar) @ 2.5 GPM (9.5 L/min)*

Yellow, 15

2800 PSI (193 bar) @ 2.4 GPM (9.1 L/min)*

Red, 0

3000 PSI (207 bar) @ 2.1 GPM (7.6 L/min)*

Water Supply Temperature 41°F (5°C) - 100°F (38°C)

min Water Supply Flow Rate 3.5 GPM (13.25 L/min)

min Water Supply Pressure 20 PSI (1.38 bar)

Engine Displacement 11.58 in

(190 cc)

Spark Plug Gap 0.020 in. (0.050 mm)

Oil Capacity 20 oz (0.6 L)

Power Ratings: The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive

Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque values are

derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM for all others; horsepower values are derived at

3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and

air cleaner installed whereas gross power values are collected without these attachments. Actual gross engine power will be higher than

net engine power and is aected by, among other things, ambient operating conditions and engine-to-engine variability. Given the wide

array of products on which engines are placed, the gasoline engine may not develop the rated gross power when used in a given piece of

power equipment. This dierence is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner,

exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity,

altitude), and engine-to engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of

higher rated power for this engine.

*This pressure washer is rated in accordance to the Pressure Washer Manufacturers’ Association (PWMA) standard PW101-2010

(Testing and Rating Performance of Pressure Washers).