Operating Guide
Assembly & Set-Up
2
7
Contents of Carton
• Battery Mower (1) • Grass Catcher Assembly (1) • Side Discharge Chute (1)
• Battery † (1) • Charger † (1) • Mower Operator’s Manual (1)
• Parts/Warranty Document (1) • Fast Start Guide † (1)
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the
model depicted may differ from yours.
NOTE: This mower is shipped as a mulching mower. To convert from a mulching mower to a grass catcher or side discharge mower refer to the Set-Up
instructions in this manual.
† If Equipped
Assembly
Handle Assembly
1. Loosen the wing knob securing the left
side upper and lower handle together.
2. Remove any packing material which may
be between upper and lower handles.
3. Remove the packaging with wing knob
and bolt Securing the right side upper
and lower handles together.
4. Gently lift and pivot the upper handle
into the position shown in Figure 2-1.
Figure 2-1
5. Insert bolt through the right side lower
and upper handle. Thread wing knob
onto bolt. See Figure 2-1 insets.
6. Secure the upper handle and lower
handle by tightening the wing knobs.
See Figure 2-1 insets.
7. Pull out the handle adjustment levers to
release the handle adjustment pins from
the handle bracket. See Figure 2-2 insets.
Figure 2-2
8. Rotate the levers (a) up perpendicular to
the handle as shown in Figure 2-2
insets. Carefully lift the handle up.
9. Place the handle into one of the three
handle height positions, high (a),
medium (b) or low (c), located on the
handle brackets. See Figure 2-3.
(c)
(b)
(a)
Figure 2-3
10. Turn the handle adjustment levers until
they are parallel with the handle to
release the pins and lock them into one
of the handle height holes in the handle
brackets. See Figure 2-3 inset.
Thank you for purchasing this product. It was carefully engineered to
provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs
you how to safely and easily set up, operate and maintain your machine.
Please be sure that you, and any other persons who will operate the
machine, carefully follow the recommended safety practices at all times.
Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product
information available at the time of printing. Review this manual frequently
to familiarize yourself with the machine, its features and operation. Please
be aware that this Operator’s Manual may cover a range of product
specifications for various models. Characteristics and features discussed
and/or illustrated in this manual may not be applicable to all models. We
reserve the right to change product specifications, designs and equipment
without notice and without incurring obligation.
If you have any problems or questions concerning the machine, phone your
local authorized service dealer or contact us directly. We want to ensure
your complete satisfaction at all times.
Throughout this manual, all references to right and left side of the machine
are observed from the operating position.
Thank You