Data Sheet

POWER - NIKKOHM
50W TO263 HIGH POWER RESISTORS
(D2PAK)
TCP50E
Dimensional Specifications (mm)
Ordering Information
TCP50E -
C 10R0 (*) F
TB
Note
| | | | |
TCP50E -
H ( >250ppm) > R02-R09 (+E6) > J(5%)
TR
> Tape & reel
A (100ppm) > R10-510K(+E24) > F(1%), J(5%)
TB
50pcs / tube
C (50ppm) > 10R-51K (+E24) > F(1%)
Resistance value (*) is available following modified E24, +E24.
1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.5 2.7 3.0 3.3
3.6 3.9 4.0 4.3 4.7 5.0 5.1 5.6 6.2 6.8 7.5 8.0 8.2 9.1
Note*: When ordering, additional ohm resistance notation is recommended for keeping out of misunderstanding.
Features and Applications
TO263 (D2PAK) 50W surface mount high power resistors.
Non-inductive design suits for automotive electronics, high frequency applications and high-speed pulse
circuits.
Thin film metalize technology presents lowest 2.3 °C/W heat resistance from resistor to flange
Wide, 20mΩ to 510kΩ resistance range, non-inductive impedance characteristic and heat venting
through insulated metal flange aids circuit designers.
Small size and thin profile suits for high-density compact installations.
Complete thermal conduction, heat dissipation design and vibration durable design to be easy.
Applications include snubber, gate control, bleeder, filter, rush current protection, braking resistors of
automotive, rail traction, wind turbine, PV, UPS and motor control inverters.
.
RoH
S
Nikkohm Co., Ltd. 3-31-2640 Minamicho, Misawa, Aomori 033-0036 Japan TEL: [phone], FAX: [phone]
© Nikkohm Co., Ltd. All rights reserved. URL: http://www.nikkohm.co.jp & http://www.nikkohm.com / e-mail: [e-mail]
TCP-20E
mm +/-mm
A 10.1 +/-0.2
B 10.3 +/-0.2
C 4.5 +/-0.2
D - -
E 5.0 +/-1.0
F 2.5 +/-0.5
G 2.2 +/-0.2
H 2.75 +/-0.2
J 0.5 +/-0.05
K 0.75 +/-0.05
L 1.5 +/-0.05
M 5.08 +/-0.10
N 1.5 +/-0.05
TCP-50E
100
CF 62
C A
B
F E
G
J
H
M
K
L
N
K
11.0
1.6
5.08
10.0
15.8
3.50
Leads, Tin plated Cu
Molding, epoxy, UL94-V0
Leads joint, 85%Pb-Sn solder
Resistor, Ni-Cr or RuO
Substrate, Alumina
Joint, Sn-Ag-Cu solder
Between flange and resistor is insulated.
Flange, matte tin plated Cu
Conrad Electronic SE - Klaus-Conrad-Str.1 - 92250 Hirschau - www.conrad.de