Install Guide & User's Manual

TRUE RESIDENTIAL

TOE KICK IS ATTACHED

TO BACK OF UNIT

INSTALLING THE TOE KICK

1. Remove from package that is taped to back of unit

2. Line up and attach the toe kick to the bottom of the cabinet using the magnets.

LEVELING REFRIGERATOR

1. Set unit in its final location. Be sure there is adequate ventilation in your room.

2. Proper leveling of your True unit is critical to operating success (for non-mobile models). Effective condensate

removal and door operation will be effected by leveling. Adjust leg levelers on the front and back of the

cabinet if it needs to be lowered or raised.

3. The unit should be leveled from the interior of the unit front to back and side to side with a level. If the

refrigerator is not level adjust the stainless steel leg levelers. The leg levelers can be adjusted by turning to

reach the desired leveling height as shown in the illustration below.

4. Free plug and cord from back of cooler (do not plug in).

5. The unit should be placed close enough to the electrical supply so that extension cords are never used.

6. Once installed in final location, insert toe kick by clipping in place.

WARNING: COMPRESSOR WARRANTIES ARE VOID IF THE UNIT IS MORE THAN

7 FT. (2.1M) FROM PLUG-IN CONNECTION OR IF AN EXTENSION CORD IS USED.