Product Manual

............ www.truemfg.com ............
True Food Service Equipment, Inc.
17
17
SETTING TIME OF DAY
LAE Electronic Control
Info/Set Point
Button
Manual Defrost/
Down Button
Manual Activation/
Up Button
Stand-By
Button
Compressor
Running
Activation of 2nd
Parameter Set - NA
Alarm - NA
Cabinet in Defrost
Evaporator Fan
Running
LAE Control Icons
May need to unlock control. Does not adjust for daylight savings time.
1
2
3
4
5
WHY:
TO MAKE SURE THE CABINET DOES NOT INITIATE
DEFROST & GET WARM DURING TIMES OF HIGH USAGE.
Control may be designed to initiate defrost at specifi c
times of the day.
HOW:
A. Tochangethetimeofday,pressandreleasetheinfo
button.“t1”willappear.
 Presstheupbuttonuntil“min”appears.
Seeimage1.
B. Whilepressingandholdingtheinfobutton,press
theupordownbuttontochangetheclock
minutes.Seeimage2.
C. Oncetheminuteshavebeensetcorrectly,releasethe
infobuttonand“hrs”willappearonthedisplay.
Seeimage3.
D. Whilepressingandholdingtheinfobutton,press
theupordownbuttontochangetheclock
hours.Seeimage4.
 Note:When changing the clock hour, the clock will be
displayed in 24 hour format ranging from 0-23.
E. Oncethehourhasbeensetcorrectly,releasetheinfo
button.
 Wait5secondsforthedisplaytoshowtemperature.
Seeimage5.
theupordownbuttontochangetheclock
theupordownbuttontochangetheclock
 Presstheupbuttonuntil“min”appears.
theupordownbuttontochangetheclock
theupordownbuttontochangetheclock
button.“t1”willappear.
 Whilepressingandholdingtheinfobutton,press
button.
 Whilepressingandholdingtheinfobutton,press
infobuttonand“hrs”willappearonthedisplay.
This is only necessary if the defrost mode parameter (DFM) is set for “RTC”.