Product Manual

............ www.truemfg.com ............

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

NOTE

When installing shelves, be sure to plan

adequate space between shelves for

product to be stocked and removed.

Step 1

Installwireshelvessorearshelfclipsarefourslotshigherthan

frontshelfclips(forgravityfeed).Topreventshelvesfrom

slidingforwardbesuretoinstallshelfretainerclips(image1).

Step 2

PlaceTrueFlexorganizeralongtankside.Guide 

bottomtabsbetweenthefirstandthirdwire  

supportsasshown(image2).

Step 3

Firmlypressandslidehandalonginsideof  

TrueFlexorganizeruntilitsnapsinplaceontopof 

shelf(image3).Tabsgripbetweenshelfwire 

supports(image3a).

Step 4

LineupsecondTrueFlexorganizeragainsttheside 

ofthefirstoneandpressintoplaceasbefore. 

Continuetheprocessuntilshelfisfilledout  

(image4).

NOTE

Organizers may not fill entire width of shelf.

INSTALLING BOTTLE ORGANIZERS (20 OZ.)

Shelf retainer clip installation,

both sides. (retainer clip

position varies depending on

model, GDM-12 shown)

Guide bottom tabs

between first and third

wire supports.

Press organizer down until

bottom tabs snap into

place between shelf wire

supports.

Tabs snap in place under

wire shelf supports.

Organizers in place.

Organizers merchandised

with 20 oz. bottles.