Use and Care

............ www.truemfg.com ............
2020
True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
Required Tools:
• Slottedscrewdriver
• Needlenosepliers
• Hex-headnutdriver
Kit Components:
• HoseCleaningBrush
WARNING
Power must be disconnected before
beginning this procedure.
1. Removethecondimentpans.
2. Removetheshelvingfromtheunit.
3. Usingneedle-nosedpliersremove
therightorleftpilasterasneeded.(This
willprovideclearancetopullrightorleft
housingawayfromevaporator).
4. Usingahex-headnutremover,remove
rightorleftC-clampsasneededfromchiller
hose.(Removeclampsfrombothendsof
theassembly).
5. Backofffourslottedthumbscrewsand
removeevaporatorhousing.
IMPORTANT
Note the proper position of the flexible tubing
on top of evaporator. (See Fig. 6). Hose will
need to be repositioned in the same area to
ensure proper conditioned air circulation.
6. Gentlypullhousingfromtherightor
leftsideandworkforwardinordertoaccess
theflexiblehose.
CAUTION
Gloves are recommended to avoid contact
with possible sharp edges.
7. Routthebottlebrushthroughthe
rearoftheflexiblehoseandpushcontents
forward.
8. Reversetheproceduresasoutlined
above.
NOTE
Replace flexible hose in the original position
as indicated in Fig. 6. Failure to replace
properly will result in compromised unit
operation.
TSSU-27-12M-C CHILLER HOSE
1
4
5
7
6
2
3