USER MANUAL loudspeaker TXD series TQ-230, TQ-308, TQ-310, TQ-315, TQ-445, TQ-425, TQ-115

user manual
QLight™ series
TQ series manual
page 11
MOUNTING AND FIXING
Rigging Hardware
A versatile range of mounting hardware is available that allows enclosures to be used in a variety
of ways, in either mobile applications or permanent installations.
A top hat stand type fitting is fitted to the base of
QLight™ series full range and mid-high cabinets
for use with 35mm diameter loudspeaker stands. A
pole mount socket is also fitted to the top of the
QLight™ sub-bass cabinets. This allows two
enclosures to be used together as an extended
frequency range system as shown here with the
TQ-445 mounted above the TQ-425 on the optional
35mm diameter straight pole. This enables a
minimum footprint for the system and ensures the
correct vertical distance between cabinets.
Internal M10 threaded rigging points are provided in several
locations on the cabinet – generally on the top, bottom, sides
and back – enabling enclosures to be suspended quickly and
inexpensively using optional M10 shoulder eyebolts.
Downward inclination of the enclosure can be adjusted using
an additional rigging point on the rear of the cabinet. Note:
these rigging points are intended to hang a single box only and
must NOT be used to rig a second enclosure in a vertical
column.