manual

ManualsBrandsTurnigy ManualsBatteriesAccucell S60 AC Charger (US Plug)

OPERATING PROGRAM

Locate the flowcharts show the entire programming menu. It is highly

recommended to have these flowcharts handy while learning to operate this

charger.

There are two main ways in which to set the charger.

A memory profile is available for setting and storing pertinent information for up

to 10 different batteries. Once a battery's information is stored into a memory it

will be retained until changed again manually. Recalling a battery's memory

number makes the charger instantly ready to go!

If you do not wish to use the battery memories, this charger can be manually

set before each use.

2. Getting started

(1)

(2)

For following step, all are basing on manually set

3. BATT/PROGRAM Select

B A T T / P R O G R A M

L i P o B AT T

4. Mode Select

6. Program Start

L i P o B A L A N C E C HG

2 . 0 A 1 1 . 1 V ( 3S )

Press INC and DEC to go through all the programs and

press START/ENTER to enter LiPo BATT Program.

5. Battery Setting

L i P o B A L A N C E C HG

2 . 0 A 1 1 . 1 V ( 3S )

Press INC and DEC to go through all the modes and press

START/ENTER to enter LiPo Balance Charge Mode.

Press START/ENTER, the current value will start to blink,

press INC and DEC to change the value and press

START/ENTER to confirm your setting.

At the same time, the battery cells number will start to blink,

press INC and DEC to change the value and press

START/ENTER to confirm your setting.

L i P o B A L A N C E C HG

2 . 0 A 1 1 . 1 V ( 3S )

B A T T E R Y C H E C K

W A I T . . .

L i P o B A L A N C E C HG

2 . 0 A 1 1 . 1 V ( 3S )

Press and hold START/ENTER for 3 seconds to start the

program.

The charger is detecting the battery cell.

R shows the number of cells detected by the charger and S

is the number of cells set by you at the previous screen. If

both numbers are not identical, press STOP to go back to

previous screen to recheck the number of cells of the battery

pack before going ahead.

R : 3 S E R S : 3 S E R

C A N C E L ( S T O P )

11 ·

ACCUCELL S60

START/ENTER

> 3 Seconds