manual
USING THE CHARGE CONTROL SOFTWARE
“CHARGE MASTER”
21 ·
ACCUCELL S60
THESETCONTAINS
1. TURNIGY ACCUCELL S60 Charger
2. Power Cord
3. 18AWG Charging Cable with XT60 Connector
2
3
1
The free “Charge Master” software gives you unparalleled ability to operate the
charger through the computer. You can monitor pack voltage, cell voltage and other
data during the charging process, view charging data in real-time graphs. And you
can initiate, control charging and update firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you
are required to use a USB cable which is not included in this package. The cable
must be terminated on one end with “A” plug and the opposite end is terminated
with “mini-B” plug which can connect to the charger directly.
The “Charge Master” can be download from www.hobbyking.com. For more details,
please refer to HELP file which can be found in “Charge Master” software.