manual

Congratulations on your choice of TURNIGY ACCUCELL S60 AC Input
Professional Balance Charger/Discharger. This unit is simple to use, but
the operation of a sophisticated automatic charger such as TURNIGY
ACCUCELL S60 does require some knowledge on the part of the user.
These operating instructions are designed to ensure that you quickly
become familiar with its functions. It is therefore important that you read
right through the Operating Instructions, Warning and Safety Notes before
you attempt to use your new charger for the first time. We hope you have
many years of pleasure and success with your new battery charger.
TURNIGY ACCUCELL S60 is an AC input charger/discharger with
compact size (112x100x51mm). Like most TURNIGY chargers, it supports
TVC (Terminal Voltage Control), Battery Meter and can be connected to
PC for PC control and firmware upgrade. And there are Automatic
Charging Current Limit, Capacity Limit, Temperature Threshold and
Processing Time Limit for maximum safety.
The maximum charging power of ACCUCELL S60 is 60W with maximum
charging current 6A and discharging current 2A. It is a high-performance
micro processor control charge/discharge station with battery
management suitable for use with all current battery types, LiPo, Lilon,
LiFe, NiCd, NiHM, PB and also new generation LiHV with end voltage
4.35V.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there
is always a risk of batteries catching fire and exploding.
INTRODUCTION
01 ·
ACCUCELL S60