manual

SPECIAL FEATURES
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is
operable for battery refreshing and balancing to stimulate the battery's activity.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or
three times in a row automatically. This is good for making certain the battery is fully
charged.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination
program based on the principle of the Delta-peak voltage detection. When the
battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or
NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the
'AUTO' charging mode.
Capacity Limit
The
charging capacity
is
always
calculated
as
the
charging
current
multiplied by
time.
If the charging
capacity
exceeds the
limit, the process
will
be
terminated
automatically when you set the maximum value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the battery to
rise. If the temperature limit is reached, the process will be terminated.
This function is available by connecting optional temperature probe, which is not included in the package.
*
Processing Time Limit:
You can also limit the maximum process time to avoid any possible defect.
Battery Meter
The user can check battery voltage and battery internal resistance.
· 04
ACCUCELL S60