SDS

Component CAS Number Concentration (wt%)

Water 7732-18-5 >90%

Polydimethyl Siloxane 63148-62-9 1-5%

Isopropyl Alcohol 67-63-0 .05 – 1.5%

4. First Aid Measures:

4.1 Description of First Aid Measures

Inhalation: Remove to fresh air and promote deep breathing. Get medical attention if effects

persist.

Skin: In case of skin contact, wash thoroughly with soap and water. If irritation persists, get

edical attention.

Eyes: In case of eye contact, immediately flush eyes with plenty of water. Remove contact

lenses if worn. If irritation persists, get medical attention

Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel.

Never give anything by mouth to an unconscious person. Give water to drink if conscious. Get

medical attention if effects persist.

4.2 Most important symptoms and effects – acute and chronic

Inhalation: May cause respiratory tract irritation.

Skin: May cause skin irritation. May cause drying, cracking, or mild dermatitis.

Eyes: May cause temporary eye irritation.

Ingestion: May cause stomach distress, nausea, and vomiting.

4.3 Indication of any immediate medical attention and special treatment

Symptoms may not appear immediately. Seek medical attention promptly if effects persist and

you feel unwell.

5. Fire Fighting Measures:

5.1 Extinguishing media

Water spray, carbon dioxide, dry chemical, and alcohol foam

5.2 Special hazards arising from the substance or mixture

, CO, and hydrocarbons

5.3 Advice for Fire Fighters

Keep up wind of fire. Wear full firefighting turn out gear (full bunker gear) and respiratory

protection (SCBA). See Section 8 for personal protection. Classified as a Combustible liquid –

NFPA 30 (III-A).

6. Accidental Release Measures:

6.1 Personal precautions, protective equipment, and emergency procedures

Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to

unnecessary and unprotected personnel.

6.2 Methods and materials for containment and clean up

For containment: Contain and absorb spill with inert material. Place in suitable container for

disposal. Use personal protective equipment (PPE).