TWIN EAGLES GRILL BASE BASE ASSEMBLY & GRILL HEAD INSTALLATION TEGB30SD-B Grill Base shown.
ASSEMBLY INSTRUCTIONS –TWIN EAGLES GRILL BASE 1. Install casters w/ brakes (A) at the front of the base and casters w/ out brakes (B) at the rear and secure them with nuts (C). 2. Install shelf brackets (D) and (E) securing them with screws (F) and side shelves. (D) (A) (I) (F) (E) (I) (C) (B) 3. Remove hex-head screws (G) and flatwasher (H) using a 5/16” wrench and place the grill head into the cart. 4.
ADDITIONAL INSTRUCTIONS –TWIN EAGLES GRILL BASE TO SECURE POWER TRANSFORMER All grill models with interior lights have a power transformer which is concealed in a stainless steel box with an attached power supply cord. This transformer must be secured in a dry location and away from excessive heat. 1. In a base cart application, 2 mounting screws with nuts are provided at the bottom-right-rear corner of the cart. If not provided, drill 2 holes using the transformer box as a template.
