System Board Manual

http://www.tyan.com
29
ONBOARD
CPU Settings for 66MHz Bus
CPU Settings for 100MHz Bus
The above clock speed settings control only the clock multiplier. 233MHz
corresponds to 3.5x; 266MHz corresponds to 4x, etc. The bus speed is BIOS
selectable. Tyan does not recommend operating CPUs, memory or the PCI bus
at higher than rated speed. Tyan takes no responsibility for any problems
related to overclocking any bus or component on the system board.
CMOS Reset
To reset CMOS settings place JP3 on pins 2-3
for 5 seconds, then replace it to the default pins
1-2 setting again for normal operation.
deepSkcolC
tluM
11PJ21PJ31PJ41PJ
zHM332
5.3xNOFFOFFONO
zHM662
4xFFONONONO
zHM003
5.4xFFONOFFONO
zHM333
5xFFOFFONONO
deepSkcolC
tluM
11PJ21PJ31PJ41PJ
zHM053
5.3xNOFFOFFONO
zHM004
4xFFONONONO
zHM054
5.4xFFONOFFONO
3PJ
tluafeD
2-1
SOMCteseR
3-2
JP11, JP12,
JP13, JP14
JP3