System Board Manual

http://www.tyan.com

Chapter 4

BIOS Configuration

* Setting option not selectable.

ACPI Aware O/S

Set this option to Yes to enable Advanced Configuration and Power Interface

(ACPI) BIOS for an ACPI-aware operating system.

Power Management/APM

Set this option to Enabled to enable the chipset power management and APM

(Advanced Power Management) features. The settings are Enabled or Dis-

abled.

Power Button Function

This option specifies how the power button mounted externally on the

computer chassis is used. See Soft Power Connector on page 31 for more

information. The settings are shown in the table below.

Green PC Monitor Power State

This option specifies the power state that the green PC-compliant video

monitor enters when AMIBIOS places it in a power saving state after the

gnitteSnoitpircseD

ffO/nO.fforonoretupmocehtsnrutnottubrewopehtgnihsuP

dnepsuS .edomrewopnOlluFroedomdnepsuSniretupmocehtsecalpnottubrewopehtgnihsuP

Setting Option Optimal Default Fail-Safe Default

Device 6 (Serial port 1) Monitor Monitor

Device 7 (Serial port 2) Monitor Monitor

Device 8 (Parallel port) Monitor Monitor

Device 5 (Floppy dis k) Monitor Monitor

Device 0 (P rimary mas ter IDE) Monitor Monitor

Device 1 (Primary slave IDE) Monitor Monitor

Device 2 (Secondary master IDE) Monitor Monitor

Device 3 (Secondary slave IDE) Monitor Monitor

LAN Wake-up Dis abled Dis abled

PC 98 Power LED Disabled Disabled

F an OF F at S us pend Enabled E nabled

RT C Wake-up Disabled Disabled

*Hour N/A N/A

*Minute N/A N/A