System Board Manual

http://www.tyan.com

BIOS

newer devices; consult your device’s user information for the appropriate port

type. There are no default settings.

Parallel Port IRQ

This option specifies the IRQ used by the parallel port, and only appears if

OnBoard Parallel Port is set to 278 or 378. The settings are 5 or 7.

Parallel Port DMA Channel

This option is only available if the setting for the Parallel Port Mode option is

set to ECP and the OnBoard Parallel Port option is set to 378, 278, or 3BC. This

option sets the DMA channel used by the parallel port. The settings are 0

through 7 in increments of one.

Onboard IDE

This option specifies the IDE channel used by the onboard IDE controller. The

settings are Disabled, Primary, Secondary, or Both.