Computer Hardware User Manual

Tiger i7320 S5350 Chapter 2: Board Installation
2-16
http://www.tyan.com
1. Locate the processor sockets on the motherboard and lift the locking lever as shown.
2. Insert the processor into the socket making sure that pin 1 is correctly located.
3. Return the locking lever to its locked position.
4. Repeat this procedure for the second processor socket.
5. Turn the board upside down and insert the heat sink spring mechanism as shown.
6. Turn the board the right way up again and screw the heat sink into place.
7. Repeat this procedure for the second processor.
Cooling Fan Installation
Some thought should be given to fan installation. There are pin headers on the board for CPU
fans and chassis fans. You may find that just chassis fans or just CPU fans are sufficient to
cool your system. If you are in any doubt about what you need, consult your dealer.
Pin 1