Motherboard Tyan S1598 Manual

http://www.tyan.com
14
** Default Setting (2.2V)
The CPU speed is controlled by setting the bus speed and the multiplier with
the jumpers described above that are appropriate for your CPU and memory.
You must have a 100MHz processor AND PC/100 memory to run at a bus
speed of 100MHz. Tyan does not recommend operating CPUs, memory or PCI
bus at higher than rated speed. Tyan takes no responsibility for any problems
related to overclocking any bus or component on the system board.
Chapter 2
Board Installation
deepSsuB4PJ5PJ6PJ
zHM06
3-23-23-2
zHM66
2-13-23-2
zHM57
2-12-13-2
zHM38
2-13-22-1
zHM59
3-22-12-1
zHM001
2-12-12-1
reilpitluM1PJ2PJ3PJ
x5.2
NONOFFO
x3
FFONOFFO
x5.3
FFOFFOFFO
x4
NOFFONO
x5.4
NONONO
x5
FFONONO
x5.5
FFOFFONO
!!
!!
!
important!
1-A. CPU Bus Speed Settings 1-B. CPU Clock Multiplier
1-C. CPU Core Voltage Settings
egatloVUPC
8PJ9PJ01PJ11PJ21PJ
V3.1
FFOFFOFFOFFONO
V4.1
FFONOFFOFFONO
V5.1
FFOFFONOFFONO
V6.1
FFONONOFFONO
V7.1
FFOFFOFFONONO
V8.1
FFONOFFONONO
V9.1
FFOFFONONONO
V0.2
FFONONONONO
V1.2
NOFFOFFOFFOFFO
**V2.2
FFONOFFOFFOFFO
V3.2
NONOFFOFFOFFO
V4.2
FFOFFONOFFOFFO
egatloVUPC
8PJ9PJ01PJ11PJ21PJ
V5.2
NOFFONOFFOFFO
V6.2
FFONONOFFOFFO
V7.2
NONONOFFOFFO
V8.2
FFOFFOFFONOFFO
V9.2
NOFFOFFONOFFO
V0.3
FFONOFFONOFFO
V1.3
NONOFFONOFFO
V2.3
FFOFFONONOFFO
V3.3
NOFFONONOFFO
V4.3
FFONONONOFFO
V5.3
NONONONOFFO
1. Setting Jumpers