Motherboard Tyan S1598 Manual

S1598 Trinity ATX

For VX/HX-2A59CT51 Date:4/13/98

File Name to Program:

Error Message:

FLASH MEMORY WRITER V3.0

Type in the whole file name, e.g. A61AW10.BIN, and confirm that you want to

program the BIOS. The utility will then “Blank,” “Erase,” and “Program” the

flash memory on the mainboard with the new BIOS file. You should choose

“Yes” to save the original system BIOS to a floppy diskette before you

program the new BIOS. This leaves you with a backup of your original BIOS in

case you need to re-install it. If you cannot successfully program the new

BIOS file for some reason, re-install your original BIOS from the backup file.

Remember, always reset the CMOS after flashing to a new BIOS (see page 33).

Warning: If you do not successfully install a complete BIOS file in the flash

memory on the mainboard, your system may not be able to boot. If this

happens, it will require service by your system vendor. Follow the instructions

in this section precisely to avoid such an inconvenience.

BIOS