User Manual

26
www.tytusgrills.com
5) Push and turn the control knob to HI. The built-in  ignitor lights the burner automatically.
If the grill doesn’t light in five seconds, turn the burner control off, wait five minutes, and repeat the lighting
procedure. If the grill still does not light:
A) Turn the burner control and gas source O
FF, and wait five minutes for the gas to clear.
B) Conduct a leak test of ALL gas connections and gas sources. See “
Check for Gas Leaks” (page 30) for
instructions. If no leaks are detected, wait five minutes for any gas to clear and repeat the lighting procedure.
Note: You may have to push and turn the control knob up to three or four times to light.
Tytus-Grills_19-0238_MAN_V1_ENG.fm Page 26 Friday, August 9, 2019 10:44 AM
OFF
LOW
HI