UB300 Flash Duplicator User Guide 33MB Per Second Data Copy 1 Sec. Check 2 Sec.. Real R Re e Capacity tyy Check 3 Sec.
CONTENT CONTENT I. Product Introduction ...................................................................................................... 2 1. Overview .................................................................................................................. 2 2. Features .................................................................................................................... 2 3. Package Content ...............................................................................
1. Overview The Flash duplicator is a stand alone, high speed and convenient equipment for easily copy data anytime and quickly check Flash device’s quality. The checking capability assists you to find out defective Flash device efficiently, like Capacity Check enables you to find out the real capacity of Flash device; Measure Speed helps you to check each Flash device’s read and write speed.
I. Product Introduction 4. Basic Instruction A. System Overview LCD Forward OK ESC USB Master port Backward USB Target port Signal LED B. Back side Power Switch and Plug of the Power Supply Power supply Power switch C.
Function Description 1. Copy USB/SD/Micro SD/CF Flash copy. 2. Compare This option makes bit-by-bit comparison between the master source and all other copied flash cards. 3. Copy+Compare This option will make a copy first and then compare the copied Flash devices with the source immediately after the copy has finished. 4.1 Device Info. This function will show Flash device’s general information includes capacity, format and data size. 4.2 Chk USB Virus To check USB VIRUS in Flash 4.
II. Function Introduction II. Function Introduction 1. Copy It copies data from source Flash device to target Flash devices. The default setting of copy area is “Data Only”. If you like to change copy area from “Data Only” to “ Whole HDD” or “All Partitions”, please refer to function [5.1 Copy Area] for selecting the copy modes Steps of copy: Plug source and target Flash devices into duplicator→Select [1.
It is used to check if the data on source Flash device is identical to the copied Flash devices after duplication. Steps of compare: Plug Flash devices into duplicator→Select [2. Compare]→Press Processing→Compare finished→ Press [ESC] to finish compare. OK USB Duplicator 2.
II. Function Introduction 4. Utility 4.1 Device Info. This function will show Flash device’s general information includes capacity, format and data size. Steps of Show Flash device’s Info.: 1. Plug Flash devices into duplicator→Select [4. Utility ]→Press Device Info. ]→Press [OK]→System shows the info. OK USB Duplicator 4. Utility OK [Utility] 1. Device Info. OK USB Duplicator [#01] USB FAT32 OK [Utility] [#01] [OK]→Select [4.1 3817M 870M USB 3817M Flash No. Capacity [#01] USB 3817M 2.
OK USB Duplicator 4. Utility OK [Utility] 2. Check USB Virus Pass:0 Fall:1 C-Virus 0 Flash without virus Flash with virus Pass:0 C-Virus Fall:1 0 Number of Flash in process 4.3 Capacity Check II. Function Introduction Forward [#01] SIZE:3817M 2. Press [Forward] / [Backward] to check other Flash devices’ virus→Press Could be Vrius! [ESC] to finish This function is to check Flash device’s real capacity and exam the Flash devices can work or not. Steps of check Flash device’s real capacity: 1.
II. Function Introduction Steps of formatting Flash device: 1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.4 Format FAT]→Press [OK]→System format the Flash devices USB Duplicator OK OK OK 4. Utility 4. Utility Do Farmat 4. Format FAT Pass:2 Confirm? Format Fall:0 0 2. Press [Forward] / [Backward] to check other Flash devices’ format status→Press [Esc] to finish. [#02] SIZE:3817M Format Complete 4.
This function is to erase Flash device’s FAT data content, it will not erase the Flash FAT16/32 format. If format is not FAT16/32, ie. NTFS, the quick erase will not execute. ** The source port (port #1) does not execute erase function. Steps of erasing Flash device’s content: 1. Plug Flash devices into duplicator→Select [4. Utility ]→Press [OK]→Select [4.6 Erase Content]→Press [OK]→System quick erase the data in Flash devices. OK USB Duplicator OK OK 4. Utility 4. Utility 6.
II. Function Introduction 5. Setup 5.1 Copy Area There are two options for copy: Only Data Area and Whole Media. 5.1.1 Only Data Area: This function is to set the copy mode to copy data area only. It is faster than copy whole Flash. It will automatically analyze the source Flash device’s file format. If the format is FAT16,32/NTFS/Linux (Ext2, Ext3) which is recognizable by the system, it will copy the data only instead of copy the whole Flash.
Q1: A1: Can I use UB300 to copy other Flash devices such as micro SD? Some users may use a USB card reader to copy other different types of Flash device, such as SD, CF, and Memory Stick etc. Due to the quality and stability of USB card reader in market are different, a poor-quality card reader may damage the system and the quality of copy. Therefore, it is recommended to copy SD/Micro SD/CF by using qualified USB card reader.
III. FAQ Q5: A5: Can I copy data by USB HDD? Yes, but please provide enough power current to both the system and USB HDD while copying. ● The system needs more power current than 2A, 5V for copy USB HDD, you need to change the adapter to 5.5V, 4A. ● Some USB HDDs need to plug 2 USB power supply to keep a stable power supply (some USB HDDs may not need to use both of the 2 USB power supply).
IV. Specification IV.Specification Model UB300 Target 1:2 Operation Stand alone Support media USB1.1 / USB2.