Patio Metal Slat Dining Table Model#:970396
PARTS A Table Top B Table Leg C 4 PCS 2 PCS Support Tube D 2 PCS Center Connector 1 PCS HARDWARE 1 M6x12 Screw 8 PCS (Extra 1) 2 M6x20 Screw 4 PCS (Extra 1) 3 M6x25 Screw 12 PCS (Extra 2) TOOLS REQUIRED Allen Wrench 1PC Pg.
PRODUCT ASSEMBLY 1 D B 3 4 x8 x8 Attach table legs (B) to center connector (D) using screws (3), washers (4) and allen wrench. NOTE: Please do not fully tighten screws until unit is fully assembled. 2 D C 3 4 x4 x4 Attach support tube (C) to center connector (D) using screws (3), washers (4) and allen wrench. NOTE: Please do not fully tighten screws until unit is fully assembled. Pg.
PRODUCT ASSEMBLY 3 B x8 x8 D 1 4 A C Lay table top (A) down on a soft flat surface, such as carpet, as shown below. Attach assembled unit (B, C & D) to table top (A) using screw ( 1 & 2), washers (4 ) and allen wrench. NOTE: Please fully tighten all screws at this time. 4 Carefully turn unit upright. Now enjoy your dining table! Pg.
PEAKHOME FURNISHINGS INC. 970 Roosevelt #202, Irvine, CA 92620 Check out more great products: www.peakhomefurnishings.com CONTACT US; WE’RE HERE 7 DAYS A WEEK TO HELP YOU! 1-818-963-1558 phf@peakhomefurnishings.com If we missed you call, please leave a detailed message including your name and phone number. We will call back as soon as possible. SOCIAL MEDIA Follow us on our Social Media by uploading a picture of our brands furnishings in your home, you will have chance to get our newest product free.